Adjusting The Width And Density For Buttonholes; Round-End And Fine Fabric Buttonholes; Keyhole Buttonhole; Stretch Buttonhole - Janome DKS100 SE Instruction Book

q
w
q
e
4
w
q
e
4
q w
e
4

Adjusting the width and density for buttonholes

• Adjusting the buttonhole width
Press the "+" sign on the stitch width adjusting key to
increase the buttonhole width.
Press the "–" sign on the stitch width adjusting key to
decrease the buttonhole width.
q Stitch width adjusting key
NOTE:
The buttonhole width can be adjusted from 2.5 to 7.0.
w
• Adjusting the stitch density
Press the "+" sign on the stitch length adjusting key to
increase the stitch density.
Press the "–" sign on the stitch length adjusting key to
decrease the stitch density.
w Stitch length adjusting key
NOTE:
The buttonhole width can be adjusted from 0.3 to 0.8.

Round-end and Fine Fabric Buttonholes

q Stitch pattern:
w Thread tension dial: 1 to 5
e Presser foot:
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 2.5 to 5.5.
The stitch density can be varied from 0.3 to 0.8.

Keyhole Buttonhole

q Stitch pattern:
w Thread tension dial: 1 to 5
e Presser foot:
Sewing procedure is the same as square buttonhole.
q
The buttonhole width can be varied from 5.5 to 7.0.
The stitch density can be varied from 0.3 to 0.8.
Use the seam ripper and an eyelet punch to open the
buttonhole.
q Eyelet punch (not provided with the machine)

Stretch Buttonhole

q Stitch pattern:
w Thread tension dial: 1 to 5
e Presser foot:
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 1.0.
The sewing steps are as shown.
32
12, 15
Automatic buttonhole foot R
13
Automatic buttonhole foot R
14
Automatic buttonhole foot R