Fora D30 Quick Start User Manual

Dear FORA D30 System Owner:
Thank you for choosing FORA D30 Blood Glucose Plus Blood Pressure
Monitoring System to take control of your diabetes. Being a home care
device, this system is helpful in tracking your blood glucose and blood
D30
pressure values.
The Quick Start User Guide will assist you in setting up the system and
BLOOD GLUCOSE PLUS
testing your blood glucose levels. Please read it carefully before use.
BLOOD PRESSURE
For complete information on the system's use and features, please
MONITORING SYSTEM refer to the Owner's Manual.
Test Strip Vial
Please note: Use only FORA D30 test strips with FORA D30 monitor.
Lancing Device
Quick Start User Guide
For self-testing. Read instructions before use. For In vitro diagnostic use.
Distributed by Fora Care
Fora Care Inc.
810 Lawrence Dr, Suite 104, Newbury Park, CA 91320 USA
Products made in Taiwan
Toll Free:
1-888-307-8188 (8:30am~5:00pm PST, Mon.~Fri.)
1-866-469-2632 (24 Hours, 7 days/week)
www.foracare.com/usa
315-3252000-003
3. Test Your Blood Glucose
3.1 3.2 3.5
Tear off the security label Wash and dry your hands Gently squeeze around the
(Tamper Seal). When opening thoroughly. Take a test strip punctured area to obtain
the vial for the first time, record out and then close the vial enough blood.
the date on the label. tightly.
3.3 3.4 3.7
Insert a test strip to turn on the Take the pre-set lancing After the monitor counts down
monitor. The sequences of LCD device. Hold the lancing to 0, your test result will
display are: " " → flashing device firmly against the appear along with the date and
" " with date and time. puncture site. Press the time and will be automatically
release button to obtain a stored in the memory.
drop of blood.
For testing with control solution, please refer to the Owner's
Manual for detailed information.
Front View of Monitor
Pressure Cuff
Repeat Button
S Button
M Button
On/Off Button
Control Solution Test Strips
(for obtaining blood from
places otherthan your
Lancets Clear Cap fingertip)
Rear View of Monitor
Adjustable Tip
Arrow
Cocking Control
Ejector
Depth
Indicator Release Button
Cap
4. Read Your Result
Your result will display the following messages:
3.6
Appears
While " " is flashing on the
display, hold and touch the
Reference values for blood glucose:
absorbent hole of the test strip
to the drop of blood until the
Time of day
confirmation window is
completely filled.
Fasting and before meal
2 hours after meals
3.8
Source: American Diabetes Association (2008). Clinical Practice Recommendations.
Diabetes Care, 31 (Supplement 1): S1-108.
Remove the used test strip.
Please work with your doctor to determine a target range that
Dispose of the used strip and
works best for you.
lancet carefully.
1. Set the Monitor
1.1
Test Slot
Up/Down Button
BT Indication Light
Press to start setting. Year
Test Strip Ejector
flashes first.
Data Port
(For FORA D30e)
Earphone Jack
1.3
1.
DC Adapter Port
Display Screen
4.
7.
Date flashes. Follow
settings is:
(1) date
Battery
Compartment (2) time format
(3) date
Battery Cover
(4) unit of blood glucose
(5) unit of temperature
The meter will automatically turn off when the setting is complete.
For memory deletion, please refer to the Owner's Manual for
details.
5. Test Your Blood Pressure
5.1
When glucose
< 20 mg/dL (1.1 mmol/L)
≥ 240 mg/dL (13.3 mmol/L)
> 600 mg/dL (33.3 mmol/L) Sit down for at least 10
minutes before measuring.
Normal plasma glucose range for
people without diabetes
< 100 mg/dL (5.6 mmol/L)
< 140 mg/dL (7.8 mmol/L)
5.3
Arrange tubing over the main
arteries inside of your arm.
Press .
2. Set the Lancing Device
1.2 2.1
Pull off the cap of the lancing
Press to change values.
device.
Hold down to increase the
number more quickly. Press
to move on to the next step. 2.3
2. 3.
5. 6.
Twist the protective disk off the
lancet.
8. 9.
2.5
to make changes. The sequence of
1.2
(6) unit of blood pressure
Select the depth of penetration
(7) voice volume
by turning the adjustable tip in
(8) memory deletion
either direction so that the
(9) language
arrow on the cap points to the
desired depth.
Lancing device, lancets and clear cap may not be included.
If your lancing device differs from the one shown here, please refer
to the manufacturer's manual to ensure proper usage.
5.2 5.5
Stretch your left arm forward
with your palm facing up. Slide
Measurement is in progress:
the cuff onto your left arm,
above your elbow. The red line Start inflation → Stop inflation
on the edge of the cuff should when cuff pressure is enough
be approximately 0.8 to 1.2
→ Cuff pressure deflates
inch (2 to 3 cm) above your
steadily
elbow.
5.4
Relax and make sure the cuff
is at the same height as your
heart.
2.2
Insert a lancet into the lancet
holder and push down firmly
until it is fully secured.
2.4
Replace the cap by aligning
the arrow on the cap with the
release button.
2.6
Pull the cocking control back
until it clicks. You will see a
color change inside the
release button when it is
ready.
5.6
The monitor will display the
systolic pressure, diastolic
pressure, and heart rate along
with the date and time. Press
to switch off.