FDFET 33121 EXPERIENCE with Flexipower English Operating instructions DISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3 Product Data, 3 Installation, 4-5-6 Description of the appliance, 7 Refined salt and rinse aid, 8 Loading the racks, 9-10 Detergent and dishwasher use, 11...
Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards.
The Delayed Start option can help you organise the wash cycles accordingly (see Special wash cycles and options, if available). Product Data (product fiche) Product Fiche HOTPOINT Brand FDFET 33121 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) 0.93...
Installation If the appliance must be moved at any time, keep it in an The water pressure must be within the values indicated upright position; if absolutely necessary, it may be tilted onto in the Technical Data table - otherwise the dishwasher may its back.
Electrical connection Changing the Mains Lead A lead can be ordered from Hotpoint Service: Before inserting the plug into the electrical socket, make sure that: - If you have damaged the existing lead or require a longer one • The socket is earthed and complies with current a charge will be made.
(depending on the The machine has a buzzer/set of tones Technical data dishwasher model ) to inform the user that a command has width 60 cm been implemented: power on, cycle end etc. Dimensions height 85 cm depth 60 cm The symbols/indicator lights/LEDs on the control panel/ display may vary in colour and may have a flashing or fixed Capacity...
Description of the appliance Overall view Upper rack Upper spray arm Tip-up dispensers Rack height adjuster Lower rack Lower spray arm Washing filter Salt dispenser Detergent and rinse-aid dispensers Data plate **** Control panel Control Panel Wash-Cycle Selection buttons Delayed Start Start/Pause On-Off/Reset option buttons...
Refined Salt and Rinse Aid Average autonomy Only use products which have been specifically designed Water Hardness Table salt dispenser with 1 for dishwashers. Do not use table salt or industrial salt. wash cycle per day Follow the instructions given on the packaging. level °dH °fH...
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
Page 10
Tip-up compartments with adjustable position* The upper rack can be adjusted for height based on requirements: The side tip-up compartments can be positioned at three different high position to place bulky crockery in the lower rack and low heights to optimize the arrangement of crockery inside the rack. position to make the most of the tip-up dispensers/sectors by creating more space upwards.
Detergent and dishwasher use Measuring out the detergent Starting the dishwasher Good washing results also depend on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button. result in a more effective wash and increases environmental 3.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Approximate Water...
Special wash cycles and Options Extra Drying Option Notes: To improve the dryness level of the crockery, press Optimum performance levels when using the “Fast wash” and the EXTRA DRYING button and the symbol/indicator “Express 30’” cycles can be achieved by respecting the specified light will light up.
Care and maintenance Shutting off the water and electricity Clean the water inlet filter at the tap outlet regularly. supplies - Turn off the water tap. - Unscrew the end of the water inlet hose, remove the filter and • Turn off the water tap after every wash cycle to avoid leaks. clean it carefully under running water.
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. •...
02/2015 pb - Xerox Fabriano and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to hel- ping the environment, Hotpoint reserves the right to 12 Months Parts and Labour Guarantee use quality, recycled components to keep down cu- Your appliance has the benefit of our manufacturer’s...
Need help?
Do you have a question about the FDFET 33121 EXPERIENCE and is the answer not in the manual?
Questions and answers