Table of Contents
Advertisement
Instruction booklet
EN
English, 1
FDUD 4411 Ultima
Contents
Installation, 2-5
Transportation
Start-up and use, 8-9
Loading the detergent
Washing options
Wash cycles, 10
Wash cycle table
Loading the rinse aid
Loading the refined salt
Shutting off the water and electricity supplies
Cleaning the dishwasher
Preventing unpleasant odours
Cleaning the sprayer arms
Cleaning the water inlet filter
Troubleshooting, 14
After Sales Service
DISHWASHER
Advertisement
Table of Contents
Related Manuals for Hotpoint FDUD 4411 Ultima
Summary of Contents for Hotpoint FDUD 4411 Ultima
-
Page 1: Table Of Contents
Ecodesign Regulation Description of the appliance, 6 Overall view Control panel Loading the racks, 7 Lower rack Cutlery basket FDUD 4411 Ultima Upper rack Start-up and use, 8-9 Starting the dishwasher Loading the detergent Washing options Wash cycles, 10 Wash cycle table... -
Page 2: Installation
Installation Advice regarding the first wash cycle Keep this instruction manual in a safe place for future After the appliance has been installed, immediately before reference. If the appliance is sold, given away or moved, running the first wash cycle, completely fill the salt please ensure the manual is kept with the machine, so that dispenser with water and add only then approximately 1 kg the new owner may benefit from the advice contained within... -
Page 3: Electrical Connection
); Changing the Mains Lead • the power supply voltage falls within the values A lead can be ordered from Hotpoint Service indicated on the data plate on the inside of the door; UK: 08709 066 066 or •... -
Page 4: Connecting The Water Supply
Connecting the water supplies Sink Waste System Connect the outlet hose (without bending it) to a drain duct Connection to the water and electricity supplies should with a minimum diameter of 32 mm. only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable. -
Page 5: Leaving The Machine Unused For Extended Periods
Transportation Anti-flooding protection To ensure floods do not occur, the dishwasher: Unload all crockery from the dishwasher and secure moving - is provided with a special system which blocks the water parts. supply in the event of anomalies or leaks from inside the All water remaining inside the appliance should be appliance. -
Page 6: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up compartments Rack height adjuster Lower rack Lower sprayer arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control panel Control panel Short Time option Good Night option indicator light indicator light Extra Dry indicator light... -
Page 7: Loading The Racks
Loading the racks Upper rack Before loading the racks, remove all food residue from Load this rack with delicate and lightweight crockery: glasses, crockery and empty liquids from glasses and cups. cups, saucers and shallow salad bowls. After loading the appliance, make sure that the sprayer arms can rotate freely. -
Page 8: Start-Up And Use
Start-up and use Switching the appliance on for the first time If the Start/Pause button is pressed so as to pause the machine, the wash cycle or the Delayed Start function (if selected) Selecting the language is interrupted. Press the ON/OFF button, you will hear a short beep and the At this stage it is not possible to change the wash cycle. -
Page 9: Extra Drying
Half load using the upper or lower rack The Short Time and Good Night options are not If there are not many dishes to be washed, a half load cycle may compatible with each other. be used in order to save water, electricity and detergent. Select The Short Time and Good Night options are not the wash cycle and press the HALF LOAD button repeatedly: the compatible with the HALF LOAD option. -
Page 10: Wash Cycles
Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. -
Page 11: Rinse Aid And Refined Salt
Rinse aid and refined salt - Press the DELAYED START button (of 1 to 5) or the HALF Only use products which have been specifically LOAD button (of 5 to 1) repeatedly until the desired hardness designed for dishwashers. level has been reached; press the P button to confirm. (1-2-3-4- Do not use table salt or industrial salt, or washing see Water hardness table ), up to a maximum of 5 levels. -
Page 12: Care And Maintenance
Care and maintenance Clean the water inlet filter at the tap outlet regularly. - Turn off the water tap. - Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water. - Replace the filter and screw the water hose back into position. -
Page 13: Precautions And Advice
• Keep detergents and rinse aids away from children. As part of Hotpoint's continued commitment to helping the • Keep children away from the open door of a dishwasher, there environment, Hotpoint reserves the right to use quality recycled could still be some detergent left inside. -
Page 14: Troubleshooting
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance). Problem: Possible causes / Solutions: The dishwasher does not start or • Switch off the appliance by pressing the ON/OFF button, switch it back on after cannot be controlled approximately one minute and reset the program. -
Page 15: After Sales Service
After Sales Service Appliance Registration We want to give you additional benefits of Hotpoint No one is better placed to care for your Hotpoint ownership. To activate your free 5 year parts appliance during the course of its working life than guarantee you must register your appliance with us. -
Page 16: Hotpoint Guarantee
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.