Security Measures - Panasonic Touchbook CF-71 Series Reference Manual

Security Measures

To prevent unauthorized access of your computer, the various security measures are provided below.
Situation
You do not want your computer to be used without permission
Same as above, but while you're away temporarily
You want to prevent theft or damage to data by using a floppy
disk
You want to prevent theft of your computer
When you do not want your computer to be used without permission
You should set your "Supervisor Password" and "User Password" (The User Password
can only be set when the Supervisor Password has been set).
Without the password, access to your computer is impossible.
Starting up when the password is set
Upon entering your Supervisor Password or User Password and pressing Enter .
*
If after three attempts the correct password is not
input, or if no password is entered for about a minute,
the computer returns to the condition just before
the attempt was made to start up the computer.
If entering the Setup Utility with Supervisor Password
You can register all items of the Setup Utility (
If entering the Setup Utility with User Password
You can not register [Advanced] menu.
F9 does not work.
When [User Password Protection] has been set to [Protected], you can not reg-
ister the User Password.
When [User Password Protection] has been set to [No Protection], you can reg-
ister the User Password (
NOTE
When only the supervisor password has been set, the password is not neces-
sary when the computer is started up, but the password becomes necessary
when the Setup Utility is started up. This alternative makes it possible to pre-
vent the contents of the Setup Utility from being changed.
Function to use
Supervisor Password
User Password
Coffee Break Password
Prevent operation by
using a floppy disk
Use security locks
If the correct password is input,
Over three incorrect attempts,
page
page 34).
Reference
below
page 10
page 11
"Names and Functions of Parts"
Will Start
Will Not Start*
(Power off)
31).
7