Using an External Display
External Display Port
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Connect the external display to your computer
NOTE
For more detailed information, please refer to the operation manual
of the external display.
3
Turn on the external display, then turn on your computer
with the display opened
You can select either an external display, LCD or simultaneous with
+ F3 .
In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility
2
Using
and
3
Using
and
4
Using
and
Enter
5
Press F10 , then select [Yes]
(
"Starting Up/Shutting Down")
(
page
31)
, select [Main]
, select [Display] and press Enter
, select the display to use and press
28
Fn