Attaching The Composite Tv-Out Adapter Cable - Dell Inspiron 3800 Reference And Troubleshooting Manual

Hide thumbs Also See for Inspiron 3800:
Table of Contents

Advertisement

support.dell.com
5.
Preserve your data in one of the following ways:
Place the computer in standby mode by pressing <Fn><Esc> (or by press-
ing <Scroll Lock><Esc> on an external keyboard if the External Hot Key
option is enabled in the System Setup program).
Place the computer in save-to-disk suspend mode by pressing <Fn><a> (or
<Fn><q> on a French keyboard).
When the green power indicator turns off, continue to step 6.
6.
Remove any device that may be installed in the media bay (see Figure 2-6):
a.
Close the computer display and turn the computer over.
b.
Slide the media bay latch toward the unlock icon to release the device in the
bay.
c.
Hold the latch in the unlock position while pulling the device out of the bay.
d.
Release the latch after you remove the device.
7 .
Slide the new battery firmly into the media bay.
You should hear a click when the battery is fully seated.
NOTE: Softex BayManager and Softex Docking Services do not report a second
battery installed in the media bay on the Storage Devices tab.
8.
Click OK, and then click OK again to close the Softex window.
9.
Press the power button to resume normal operation.
Attaching the Composite TV-Out Adapter
Cable
Your computer has a TV-out S-video connector for connecting a television to the
computer. To connect a television, perform the following steps:
1.
Save and close any open files, exit any open application programs, and shut down
the computer.
2.
If the television has an S-video cable, connect the S-video cable from the TV to
the computer's TV-out S-video connector.
If the television has only a composite video cable connector, plug the composite
TV-out adapter cable that came with your computer into the TV-out S-video
connector on the computer (see Figure 2-7). Connect the other end of the
composite TV-out adapter cable to the television's composite video cable, and
then plug the composite video cable into the TV.
NOTE: If your television did not come with a composite video cable, you can
purchase one from a local electronics store.
3.
Turn on the computer.
Options and Upgrades
2-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents