Trim Options; Flat Surround - Majestic Vermont Castings HE32EF Installation Instructions & Homeowner's Manual

1) RHESS, RHESL, RHESSD, RHESLD & RHESXL TRIMS
FRAME ASSEMBLY
RHESS, RHESL, RHESSD, RHESLD and RHESXL
1. Lay Trim Top Facing and Trim Side Facings, face down
on to an even surface such as a table or floor. Be sure
not to scratch the painted surfaces.
2. Install the nuts and bolts (Fig. 8).
FRAME TOP
LEFT
FRAME
FIG.1
AS SHOWN FROM BACK
TRIM ASSEMBLY
RHESS, RHESL, and RHESXL
1. Install trim channels (left and right sides). Use two
screws to assemble each piece.
2. Slide on the trim top channel and fasten it from the back
side.
3. Install the trim top deflector and use two screws to fasten
it. (Fig. 9 & 10)
4. Remove ALL plastic protective covering from brass trim.
SCREW
TRIM SIDE
CHANNEL
AS SHOWN FROM FRONT
TRIM OPTIONS FOR HE32EF
10/24
SCREWS
RIGHT
FRAME
10/24
NUTS
TRIM TOP CHANNEL
TRIM SIDE
CHANNEL
DEFLECTOR
TRIM TOP
Trim Top Deflector
RHESSD and RHESLD (Fig. 11)
1. Install trim channels (left and right sides). Use two
screws to assemble each piece.
2. Peel off plastic protective covering from top edges of
the inner sides where the facing iner top will cover.
3. Place the trim facing inner top in place (do not fasten it
yet). Peel off the plastic protective covering from the
bottom edge.
4. Install the trim top deflector and fasten it (will hold the
inner top piece). Use two screws to assemble them.
Fig. 8
5. Install trim channels (left and right sides). Use two
screws to assemble each piece.
6. Slide on the trim top channel and fasten it from the back
side.
7. Remove ALL plastic protective covering from brass
trim.
SCREW
TRIM SIDE
CHANNEL
A flat louvre kit OR a bay window kit
needs to be chosen to complete the
installation.
Fig. 9
- 13 -
Trim Frame Top Section
Side View
TRIM TOP CHANNEL
DEFLECTOR
TRIM TOP
TRIM FRAMING
INNER SIDES
AS SHOWN FROM FRONT
Fig. 10
TRIM FRAMING
INNER TOP
TRIM SIDE
CHANNEL
Fig. 11