Download Print this page

Gocycle G2R Quick Start Operation Manual

Hide thumbs Also See for G2R:

Download this manual See also: Owner's Manual

Pre-Ride Checks

Check that your brakes are working

properly by pulling both brake levers

Check that the minimum insertion

Your front brake is indicated by a

and ensuring that the levers do not touch

mark on the upper seat post has not

yellow ring as shown

the handlebar grip

been exceeded

Quick Start Operation Guide

Gocycle

G2R

Frame Numbers 230001–230500

Ensure that the quick release

Ensure all cam levers on the front and

Check that the lower seat post is

Version 3

lever remains in the closed

rear PitstopWheels are fully closed and

inserted fully and the minimum insertion

position as shown

listen for a "click" from each

mark has not been exceeded

Please read the Gocycle Owner's Manual completely before riding your Gocycle

techsupport@gocycle.com

www.gocycle.com

Need help?

Do you have a question about the G2R and is the answer not in the manual?

Page 1 PitstopWheels are fully closed and inserted fully and the minimum insertion position as shown listen for a “click” from each mark has not been exceeded Please read the Gocycle Owner’s Manual completely before riding your Gocycle techsupport@gocycle.com www.gocycle.com...
Page 2 Your Gocycle includes a predictive downshift feature. When slowing down, your Gocycle will automatically downshift from 3rd gear to 2nd gear (at 7 LEDs) and from 2nd gear to 1st gear (at 3 LEDs). It is possible to override the automatic downshift by double- clicking button to shift down.
Page 3 Step 5: Returning the Battery to Sleep Mode The Gocycle will use power when stationary and in Operation mode, or while the charger light is green. This will drain the battery. Best practice is to enter Sleep mode to conserve the battery—when not in use and/or the battery is fully charged.