Troubleshooting - Black & Decker BDEJS300 Instruction Manual

FREE WARNING LAbEL
REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-
544-6986 for a free replacement.
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLAck+DeckeR help line at
1-800-544-6986.

TROUbLESHOOTING

Possible Cause
• cord not plugged in.
• circuit fuse is blown.
• circuit breaker is tripped.
• cord or switch is damaged.
Imported by:
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in the
packaging, call the local company or see the
website for warranty information.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a BLAck+DeckeR service
center or authorized servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip, discontinue
use immediately and have it
serviced at a BLAck+DeckeR service
center or authorized servicer.)
• Have cord or switch replaced at
BLAck+DeckeR Service Center or
Authorized Servicer.
7