Service Information; Specifications; Troubleshooting - Black & Decker HG2000K Instruction Manual

ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
TROUBLE! UNIT WILL NOT START.
WHAT'S WRONG?
Cord not plugged in
Circuit fuse is blown
Circuit breaker is tripped
Cord or switch is damaged

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-
owned and authorized service locations. All
BLACK+DECKER Service Centers are staffed with
trained personnel to provide customers with efficient and
reliable power tool service. For more information about
our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts,
contact the BLACK+DECKER location nearest you,
or visit us at www.BlackandDecker-la.com

SPECIFICATIONS

Power
B3
Heat setting
Switch control
Temperature
Air flow
Cable length
TROUBLE SHOOTING
WHAT TO DO...
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit
fuse to blow, discontinue use immediately and have it serviced at
a BLACK+DECKER service center or authorized servicer.)
Reset circuit breaker. (If the product repeatedly causes the circuit
breaker to trip, discontinue use immediately and have it serviced
at a BLACK+DECKER service center or authorized servicer.)
Have cord or switch replaced at BLACK+DECKER Service
Center or Authorized Servicer.
ENGLISH • 19
HG2000
1800 W
Variable
2 Stage (I/ II)
50-450 ºC / 90-600 ºC
300-500 l/min
2 m