Screening Calls; Recording Incoming; Messages - Radio Shack 43-3818 Owner's Manual

5 "%
%4''0+0)
You can let the system answer calls while you listen
to the caller's message through the speaker.
Press to answer the call if the handset is off
TALK
the base, or lift the handset if it is on the base. You
can also pick up any phone on the same line. The
system stops recording and resets to answer the
next call.
8 or 9 to adjust the call screening
Press
VOL
volume level. If you do not want to listen to calls,
repeatedly press
VOL
4 "+
'%14&+0)
After the system answers a call, it plays the
outgoing message, beeps, then records the caller's
message. Each incoming message can be up to 1
or 4 minutes long, depending on how you set the
recording time (see "Setting the Record Time" on
Page 28). The maximum recording capacity is
about 16 minutes (or 59 messages).
The system stops recording and resets to answer
the next call when:
• The caller hangs up.
• The maximum message length is reached.
• The system detects a busy signal or more than
7 seconds of silence.
• You pick up the handset or any phone on the
same phone line. ±ý
4 "
'%14&+0)
A memo is a message you can record for yourself
or others. The system stores memos as incoming
messages (see "Playing Messages").
Hold down
MEMO
"Record memo message" and beeps. Speak your
#ý# #ý# #ý# #ý#
message. flashes.
#..5
& & & &
9 until appears. ±ý
"/
0%1/+0)
"/
# '/1
until the system announces
±ý
Even if you turn the volume
'55#)'5
to
can still hear incoming
message playback and
announcements.
±ý

Messages

When the message
memory is full, the caller
hears "Hello, no one is
available to take your call.
Please call again." The
system cannot record
additional messages until
you delete some of the old
messages (see "Deleting
Messages" on Page 33).
± ±
"016'" "

Screening Calls

& & & &
for call screening, you

Recording Incoming

31