Radio Shack 43-3818 Owner's Manual page 11

843-7422) for information on Ni-Cd battery recycling
and disposal bans/restrictions in your area.
RadioShack's involvement in this program is part of
the company's commitment to preserving our
environment and conserving our natural resources.
5 "
'66+0) 6*'
Your phone comes set for tone dialing. If you have
pulse service, you need to change the dialing mode.
If you are not sure which type of service you have,
do this test:
1. Lift the handset, press
dial tone.
2. Press any number other than
an outside line access code (9, for example).
If the dial tone stops, you have touch-tone
service.
If the dial tone continues , you have pulse
service.
Once you have determined which type of service
you have, set the dialing mode.
1. Press to hang up the phone if necessary,
END
then hold down
screen appears.
9
2. Press 4 or
3. Press to toggle between
SEL
If the battery power is too low, the dial mode might
reset to tone. If you are on a pulse line and cannot
make a call, try re-setting the dialing mode to pulse.
"& "/
+#.+0)
, and listen for a
TALK
0
until the selection
CID/MENU
three times to select
Jed[ý Jed[ý
Jed[ý Jed[ý
1&'
or, if required,
:_Wb :_Wb
:_Wb :_Wb
.
Fkbi[ Fkbi[
Fkbi[ Fkbi[
. ±ý
and
± ±
"016'"
The phone exits setting
mode if a call or page is
received, or if you press
END.
"
11