Commands; Remote Commands - Radio Shack 43-3818 Owner's Manual

7 "4
5+0) '/16'
While in remote operation, the system stops all
answering functions and displays
functions resume when it is no longer being
operated remotely, if you have not turned the
system off.
Remote operation stops when someone picks up
the handset or any phone on the same phone line.
1. Dial your phone number and wait for the
system to answer. If the system is not set to
answer calls, it will answer after about ten rings
and sound a series of beeps.
2. When the outgoing message begins (or the
system sounds a series of beeps), press
then enter your security code within 2 seconds.
3. If the code is correct , the system announces
the number of new and old messages, then "To
play incoming message, press
# # # #
press ."
0
If the system does not respond , try entering
your code again. If you enter an incorrect code
three times, the system beeps and
disconnects.
4. While the system is beeping, press # and
(within 2 seconds) the number for the desired
command. (See "Remote Commands" on
Page 36.) ±ý
"%
1//#0&5
Bh Bh Bh Bh
. Answering
# # # #
. For help,
2
# # # #
,
±
If you wait more than 15
seconds between
keypresses, the system
sounds a long beep and
hangs up.
±
"016'" "
35