View Devices Currently On The Network - NETGEAR R6400 User Manual

The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.

View Devices Currently on the Network

You can view all computers or devices that are currently connected to your network.
To view devices on the network:

1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The Wired Devices section lists devices that are connected to the router with Ethernet
cables. The other sections list devices that are connected to each WiFi band in the WiFi
network. The following information is displayed for wireless devices:
• SSID. The SSID of the WiFi network that the device is connected to.
• IP Address. The IP address that the router assigned to this device when it joined the
network. This number can change if a device is disconnected and rejoins the network.
AC1750 Smart WiFi Router
Manage Your Network
144