NETGEAR R6400 User Manual page 127

If you already set up the Internet connection for your router and you are sure that you want to
set up the router as an access point, see
page 128.
To set up the router with your existing router or gateway:

1. Use an Ethernet cable to connect the Internet port of this router to a LAN port on your
existing router or gateway.
2. Launch an Internet browser from a computer or wireless device that is connected to the
network.
The first time that you set up the Internet connection for your router, the browser goes to
http://www.routerlogin.net, and the NETGEAR genie page displays:
If you do not see the NETGEAR genie page, type http://www.routerlogin.net or
http://www.routerlogin.com. When prompted, enter admin for the user name and
password for the password.
If this is not the first time that you are setting up the Internet connection for your router,
run the Setup Wizard again. For more information, see
page 22.
3. Select the Help Me Choose radio button or Let Me Choose radio button:
• Help Me Choose. If you select the Help Me Choose radio button, NETGEAR genie
asks you a few questions to determine if you should set the router in router mode or
access point mode. NETGEAR recommends that you select the Help Me Choose
radio button.
• Let Me Choose. If you select the Let Me Choose radio you must select the Router
Mode radio button or the Access Point Mode radio button. You can change the
mode by running the Setup Wizard again. For more information, see
Setup Wizard
AC1750 Smart WiFi Router
Use the Router as a Wireless Access Point
on page 22.
Specify Network Settings
127
Cable this port to a LAN port
on another router
Use the Internet Setup Wizard
Use the Internet
on
on