NETGEAR R6400 User Manual page 88

The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Settings > Dynamic DNS.
5. Select the Use a Dynamic DNS Service check box.
6. In the Service Provider menu, select one of the following:
• NETGEAR
• www.no-ip.com
• www.DynDNS.org
7. Select the Yes radio button.
The page adjusts and displays the Show Status, Cancel, and Apply buttons.
8. In the Host Name field, type the host name (sometimes called the domain name) for your
account.
9. For a No-IP or Dyn account, in the User Name field, enter the user name for your account.
10. For a NETGEAR account at No-IP, in the Email field, type the email address for your
account.
11. In the Password (6-32 characters) field, type the password for your DDNS account.
12. Click the Apply button.
Your changes are saved.
13. To verify that your Dynamic DNS service is enabled in the router, click the Show Status
button.
A message displays the Dynamic DNS status.
AC1750 Smart WiFi Router
Access the Router's USB Drive Through the Internet
88