View Devices Currently On The Network - NETGEAR Nighthawk RS700 User Manual

View devices currently on the network

You can view all devices that are currently connected to your network. If you are using
VPN, you can also view the remote devices that are connected to your router through
VPN.
To view devices on the network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The following information is displayed:
• Status: Displays only if network access control (see Network access control list
on page 61) is enabled. The field displays if a device is allowed or blocked.
• Connection Type: Either wired or the WiFi band for the connection
• Device Name: The device name, if known
• IP Address: The IP address that the router assigned to this device when it joined
the network. This address can change if a device is disconnected and rejoins the
network.
• MAC Address: The unique MAC address for each device. The MAC address is
typically shown on the product label of the device.
NOTE: Some iOS and Android devices display a private or randomized
MAC address when connecting to WiFi. If a device does not connect to
your WiFi network for a while, it might connect with a different MAC
address next time. You can disable this setting on your iOS or Android
device.
Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
135 User Manual