Rear Panel; Position Your Router - NETGEAR R6400 User Manual

Table 1. LED and button descriptions (continued)
LED Description
USB 2.0-Printer •
port
•
•
Ethernet ports The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100
1–4 Mbps or 10 Mbps Ethernet connections.
•
•
•
WiFi On/Off Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
button with LED
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you
cannot use WiFi to connect to the router.
WPS button with This button lets you use WPS to join the WiFi network without typing the WiFi password. The
LED WPS LED blinks white during this process and then lights solid white.
You can disable LED blinking or turn off all LEDs except the Power LED. For information
about how to do this, see

Rear Panel

The rear panel includes the connections and buttons shown in the following figure.
Reset
button
Figure 3. Router rear panel
Pressing the Reset button restores the factory settings. See

Position Your Router

The router lets you access your network anywhere within the operating range of your
wireless network. However, the operating distance or range of your wireless connection can
AC1750 Smart WiFi Router
Solid white. A USB device is connected and is ready.
Blinking. A USB device is plugged in and is trying to connect.
Off. No USB device is connected or someone clicked the Safely Remove Hardware
button and it is now safe to remove the attached USB device.
Solid. A powered-on device is connected to the Ethernet port.
Blinking. The port is sending or receiving traffic.
Off. No device is connected to this Ethernet port.
Disable LED Blinking or Turn Off LEDs
Ethernet Internet
LAN ports 1–4
Hardware Setup
USB 2.0 Power
port port On/Off
Factory Settings
11
on page 107.
Power
connector
on page 178.