Table of Contents
Advertisement
6.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
Z170-K Front panel audio connector
•
•
7.
M.2 socket 3
This socket allows you to install an M.2 (NGFF) SSD module.
Z170-K M.2(SOCKET3)
1-18
AAFP
Z170-K
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD]. See section 2.6.7 Onboard Devices Configuration for
details.
M.2(SOCKET3)
Z170-K
PIN 1
HD-audio-compliant
Legacy AC'97
pin definition
compliant definition
Chapter 1: Product introduction
Hide quick links:
Advertisement
Table of Contents
