Software Feature Mask Configuration - Asus Z170-K User Manual

Hide thumbs Also See for Z170-K:
Table of Contents

Advertisement

Alternate ID [Disabled]
This item allows you to enable or disable the report for the alternate device ID.
Configuration options: [Auto] [Disabled] [Enabled]

Software Feature Mask Configuration

Allows you to configure the SWFM (Software Feature Mask) settings.
RAID 0 / RAID 1 / RAID 10 / RAID 5 [Enabled]
Allows you to enable or disable the RAID 0 /RAID 1/ RAID 10/ RAID 5 feature.
Configuration options: [Disabled] [Enabled]
Intel Rapid Recovery Technology [Enabled]
Allows you to enable or disable the Intel Rapid Recovery Technology. Configuration
options: [Disabled] [Enabled]
OROM UI and Banner [Enabled]
When enabled, the OROM UI is shown. Configuration options: [Disabled] [Enabled]
HDD Unlock [Enabled]
When enabled, the HDD password unlock feature is activated. Configuration options:
[Disabled] [Enabled]
LED Locate [Enabled]
When enabled, the LED/SGPIO hardware is attached and ping to locate feature is
enabled on the OS. Configuration options: [Disabled] [Enabled]
IRRT Only on eSATA [Enabled]
When enabled, only the IRRT volumes can span the internal and eSATA drives. When
disabled, any RAID volume can span the internal and eSATA drives. Configuration
options: [Disabled] [Enabled]
Smart Response Technology [Enabled]
Allows you to enable or disable the Smart Response technology. Configuration options:
[Disabled] [Enabled]
OROM UI Normal Delay [2 sec]
Allows you to select the delay time of the OROM UI Splash screen in a normal status.
Configuration options: [Disabled] [Enabled]
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better energy saving
conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration
options: [Disabled] [Enabled]
SATA6G_1~6(Gray) [Enabled]
Allow you to enable/disable the SATA6G_1~6 port. Configuration options: [Disabled]
[Enabled]
Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
External SATA [Disabled]
Allow you to enable/disable the external SATA support. Configuration options: [Disabled]
[Enabled]
2-32
Chapter 2: Getting started

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z170-p

Table of Contents