Super Pulsar Quick Start; Connecting Your Super Pulsar; Mono Guitar / Instrument Setup; Mono Input / Stereo Output Setup - Electro-Harmonix Super Pulsar User Manual

Stereo tap tremolo/panner

Hide thumbs Also See for Super Pulsar:

Quick start manual (2 pages)

Table Of Contents

Table of Contents

CONNECTING YOUR SUPER PULSAR

MONO Guitar / Instrument Setup

 Use standard, mono ¼" instrument cables for all Super Pulsar audio

connections.

 Plug your guitar, or the output of the previous effects pedal, into the

MONO / L input jack.

 Connect the MONO / L output on the Super Pulsar into your amplifier or into

the input of another pedal.

MONO Input / STEREO Output Setup

 Start with the MONO Guitar setup above.

 Grab a third instrument cable and plug it into Super Pulsar's Right output.

 Connect the third cable to a second amplifier or the stereo input of a stereo-

in guitar pedal, such as the EHX Cathedral, or use it to split your signal into

another pedal chain.

STEREO Input / STEREO Output Setup

 Building upon the MONO in/STEREO out setup above, add a fourth

instrument cable and plug it into the Right input on Super Pulsar.

 Plug the fourth cable into a stereo source, such as a keyboard or the output

of a stereo guitar pedal, like the EHX Stereo Electric Mistress.

BASIC TREMOLO SETTINGS

Standard Sine Wave Tremolo:

VOLUME = 1 o'clock

SHAPE = 12 o'clock

ENV DEPTH = 12 o'clock

Chopped Tremolo:

VOLUME = 1 o'clock

SHAPE = 11 o'clock

ENV DEPTH = 12 o'clock

ENVELOPE CONTROLS – See page 3 for a full explanation on ENV controls.

Rate Slows As Notes Fade:

VOLUME = 1 o'clock

SHAPE = 12 o'clock

ENV DEPTH = 12 o'clock

PRESET MODE – See page 13 for a full explanation on Presets.

Entering Preset Mode/Loading Factory Presets:

 Press and hold the MODE footswitch.

 After 2 seconds, all the LEDs in the waveform display light up.

 Release the MODE footswitch, you are now in Preset mode.

 Press and release the MODE footswitch to load and advance the presets.

CREATING YOUR OWN RHYTHM PATTERNS – See page 14.