Table of Contents
Advertisement
Switch Housing
www.CasablancaFanCo.com
1.888.227.2178
Feed the wire plug through the center
Insert the third screw, found in
Screw two housing assembly screws
from the
hardware bag halfway into
hole of the upper switch housing, then
the
hardware bag, into place and
wrap keyhole slots around the screws and
then tighten all three screws.
the motor housing. It does not matter
twist counterclockwise.
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
15
M6003-01 • 04/16/15 • © 2012–2015 Casablanca Fan Company
Advertisement
Table of Contents
