3.6.9
Network Stack Configuration
Network stack [Disabled]
This item allows you to disable/enable the UEFI network stack.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set the Network Stack to [Enabled].
Ipv4 PXE Support [Enabled]
This item allows you to enable/disable the Ipv4 PXE Boot Support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows you to enable/disable the Ipv6 PXE Boot Support.
Configuration options: [Disabled] [Enabled]
3.6.10
NVMe Configuration
NVMe Configuration
This item allows you to use NVMe controller and Drive information.
3-50
Chapter 3: BIOS setup