Aqua Lung pearl i3 Owner's Manual page 14

Pearl i3 BC Owner's Manual
5. Place the fitting over the quick discon-
nect plug and firmly push inward while
releasing the hose grip. Check to ensure
the hose is securely attached.
6. To test the connection, slowly open the cylinder valve and pressurize
the regulator. Lift up on the lever and listen for the flow of air into the BC
bladder.
NOTE: The Pearl i3 is equipped with a longer than normal MP inflator hose.
It is very important to use the inflator hose provided with the BC (if the hose
is too short it will not reach the i3 control unit.)
Hose lengths are as follows:
XS/S – 27 inches (pn 24827 — red)
M/ML/L – 33 inches (pn 24833 — light blue)
3