Dhcpv6 Client Setup - ZyXEL Communications GS3700 Series User Manual
Gbe l2+ switch
Hide thumbs
Also See for GS3700 Series:
- User manual (549 pages) ,
- Cli reference manual (361 pages) ,
- Handbook (215 pages)
Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 29 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Setup
LABEL
Interface Type
Interface ID
Neighbor Address
MAC
Add
Cancel
Clear
Index
Interface
Neighbor Address
MAC
Delete
Cancel
6.9.11 DHCPv6 Client Setup
Use this screen to configure the Switch's DHCP settings when it is acting as a DHCPv6 client. Click
the link next to IPv6 Neighbor Setup in the IPv6 Configuration screen to display the screen as
shown next.
Chapter 6 Basic Setting
DESCRIPTION
Select the type of IPv6 interface for which you want to configure. The Switch supports
the VLAN interface type for IPv6 at the time of writing.
Specify a unique identification number (from 1 to 4094) for the interface.
Note: A static IPv6 neighbor entry displays in the Management > Neighbor Table
screen only when the interface ID is also created in the Basic Setup > Interface
Setup screen.
Note: To have IPv6 function properly, you should configure a static VLAN with the same
ID number in the Advanced Setup > VLAN screens.
Specify the IPv6 address of the neighboring device which can be reached through the
interface.
Specify the MAC address of the neighboring device which can be reached through the
interface.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the nonvolatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This field displays the IPv6 address of the neighboring device which can be reached
through the interface
This field displays the MAC address of the neighboring device which can be reached
through the interface.
Check the entry(ies) that you want to remove in the Delete column and then click
Delete to remove the selected entry(ies) from the summary table.
Click Cancel to clear the Delete check boxes.
GS3700/XGS3700 Series User's Guide
86
Advertisement
Table of Contents
