ZyXEL Communications ZyAIR G-110 Quick Installation Manual
ZyXEL Communications ZyAIR G-110 Quick Installation Manual

ZyXEL Communications ZyAIR G-110 Quick Installation Manual

802.11g wireless cardbus card
Hide thumbs Also See for ZyAIR G-110:

Advertisement

ZyAIR G-110
802.11g Wireless CardBus Card

Quick Installation Guide

Version 1.10
May 2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZyAIR G-110 and is the answer not in the manual?

Questions and answers

Summary of Contents for ZyXEL Communications ZyAIR G-110

  • Page 1: Quick Installation Guide

    ZyAIR G-110 802.11g Wireless CardBus Card Quick Installation Guide Version 1.10 May 2004...
  • Page 2 Procedure to View a Product’s Certification(s) 1. Go to www.zyxel.com 2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3. Select the certification you wish to view from this page.
  • Page 3: Installation Requirements

    1. Installation Requirements Before installation, make sure you have the following requirements. • Pentium II 300MHz or above • A minimum of 6 MB available hard disk space • A minimum of 32 MB RAM • A CD-ROM drive • A CardBus slot •...
  • Page 4 2. Click Next to accept the default file location or click Browse to select an alternate folder. 3. Windows 98 SE/Me: Click Finish to restart the computer. 4. Locate an available CardBus slot on the computer. 5. With the pin connectors facing the slot and the LED side facing up, slide the ZyAIR into the slot.
  • Page 5: Led Display

    7. Windows XP: A Found New Hardware Wizard windows displays. Select Install the software automatically (recommended) and click Next. 8. Windows XP: If a warning window displays, click Continue Anyway. Then click Finish to complete the installation process. After you install the ZyAIR Utility and insert the ZyAIR, an icon appears in the system tray.
  • Page 6 2. Connect one end of the antenna converter cable to the external antenna connector on the ZyAIR. 3. Connect the other end of the converter cable to the Reverse-SMA plug of the external antenna. (It is recommended you use ZyXEL’s external antenna series.)
  • Page 7: Troubleshooting

    Troubleshooting PROBLEM CORRECTIVE ACTION Windows does not Make sure the ZyAIR is inserted into the computer CardBus slot auto-detect the properly and then restart your computer. Check the LEDs on ZyAIR. the ZyAIR. Perform a hardware scan by clicking Start, Settings, Control Panel and double-clicking Add/Remove Hardware.

Table of Contents