Single-Use Operation - Bosch DICENTIS User Manual

10 en | Wireless Device operation
4.2

Single-use operation

Enable the microphone:
Push your microphone request button to enable the microphone.
–
–
–
Cancel your request-to-speak:
When the LED-bar above your microphone request button is green or flashes green, you can
push your microphone request button to cancel the request-to-speak. Optionally: the clerk or
operator can disable the possibility to cancel the request-to-speak.
Disable the microphone:
When the LED-bar above your microphone request button is red, you can push the
microphone request button to disable the microphone. The LED-bar above your microphone
request button goes off. Optionally: the clerk or operator can disable the possibility to disable
the microphone.
Mute the microphone:
Your microphone is muted as long as you push the microphone mute button (left-hand
microphone request button).
Push-to-talk mode:
When your device is in the Push-To-Talk (PTT) mode, the microphone is enabled as long as you
push your microphone request button. You can only enable the microphone when the LED in
the microphone request button is lit.
Voice mode:
When your Wireless Device is in Voice mode, the microphone is always enabled. Push and hold
your microphone request button or mute button to temporarily mute the microphone.
In Voice mode, you cannot make a request-to-speak.
Find your seat:
The touch screen of the Wireless Device shows your name in the top line.
Identify yourself:
–
–
Voting:
–
–
–
2015.02 | V1.0 |
If the white icon in the microphone request button is lit, the LED-bar above your
microphone request button will immediately turn red, and you can speak.
If the LED-bar above your microphone request button is green, your request-to-speak is
accepted. You cannot speak until the LED-bar above your microphone request button
turns red.
When the LED-bar above your microphone request button flashes green, you are first in
the waiting list. Your microphone will be enabled soon.
The touch screen will display instructions for identifying yourself.
Hold your NFC tag close to the left-hand side of the Wireless Device as indicated on the
touch screen.
The clerk or operator opens a voting session. When the voting session is opened, your
blue present button is shown on the touch screen.
Push your blue present button to confirm your presence. Your vote buttons are displayed.
Cast your vote. You can change your vote until the clerk or operator has closed the voting
session.
The clerk or operator can temporarily hold the voting session. While the voting session is
on hold, you cannot cast or change your vote.
User manual
DICENTIS
Bosch Security Systems B.V.