Advertisement
TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)
5
Light Pull
Chain
If necessary, attach the extension chain
provided to the fan pull chain coming
from the switch housing. Then feed the
end of the extension chain through the
grommeted hole in the light kit.
7
Globe
Finial
Cap
Finial
Installing the globe - Press the globe
flush against the metal plate. Thread the
light pull chain through the hole in the
center of the finial cap and thread the fan
pull chain through the hole in the side of
the cap. Finally, thread only the light pull
chain through the hole in the finial and
screw the finial onto the threaded rod.
Fan Pull
Chain
Grommeted
Hole
9
MA038-01 • 04/27/15
6
Installing the bulb - Install a bulb
into each socket. When necessary,
replace bulbs with bulbs of same
type and wattage.
8
Installing the pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn
power on. Your installation is complete.
1.888.830.1326
Socket
Advertisement
