Advertisement
TYPE-A ASSEMBLY INSTRUCTIONS
1
Switch
Housing
If your fan does not have pin connectors on
the wires coming from the switch housing,
install the wiring harness provided. Using
the provided wire connectors connect the
white wire from the fan to the white wire
from the wire harness and connect the
black or blue wire from the fan to the black
wire from the wire harness.
3
Lift the light kit up to meet the lower
switch housing. Attach the light kit to
the switch housing using the keyhole
slots to engage the light kit screws.
Rotate clockwise. Tighten screws securely
through the access holes.
Wire
Connector
Access
Hole
4
MA038-01 • 04/27/15
2
Light Kit
Screw
Screw the two light kit screws halfway into
the switch housing. Using the single pin
connectors, connect the black or blue wire
from the fan to the black wire from the
light kit. Connect the white wire from the
fan to the white wire from the light kit.
4
Light Pull
Chain
If necessary, attach the extension chain
provided to the fan pull chain coming
from the switch housing. Then feed the
end of the extension chain through the
grommeted hole in the light kit.
Do not allow the light kit to hang
only by the wire connections!
1.888.830.1326
Fan Pull
Chain
Grommeted
Hole
Advertisement
