Advertisement
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
5
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
7
Installing the Pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn on
power. Your installation is complete!
Socket
5
MA038-01 • 04/27/15
6
Globe
Finial
Cap
Finial
Installing the globe - Press the globe
flush against the metal plate. Thread
the light pull chain through the hole in
the center of the finial cap and thread
the fan pull chain through the hole in
the side of the cap. Finally, thread only
the light pull chain through the hole in
the finial and screw the finial onto the
threaded rod.
1.888.830.1326
Advertisement
