Advertisement
WHICH ASSEMBLY METHOD WILL I USE?
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
Cap
Screw
If your fan's switch housing cap
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the TYPE-A ASSEMBLY
INSTRUCTIONS on pages 4-5.
Switch
Housing
Screw
If your fan's switch housing cap
resembles this one, remove the whole
switch housing by removing the switch
housing screws with a Phillips head
screwdriver. Remove the plug button.
Then follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
Switch
Housing
Cap
If your fan's switch housing cap resembles
housing by removing the switch housing
housing screws. Then follow the TYPE-A
ASSEMBLY INSTRUCTIONS on pages 4-5.
Plug
Button
If your fan's switch housing cap resembles
housing by removing the switch housing
Remove the plug button using a standard
ASSEMBLY INSTRUCTIONS on pages 8-9.
3
MA038-01 • 04/27/15
Switch
Housing
Screw
this one, remove the whole switch
screws with a Phillips head screwdriver.
Remove the two cap screws from the
inside of the switch housing. Reinstall
the switch housing. Tighten the switch
Plug
Button
this one, remove the whole switch
screws with a Phillips head screwdriver.
screwdriver. Then follow the TYPE-C
1.888.830.1326
Switch
Housing
Cap
Switch
Housing
Screw
Advertisement
