Honeywell Marathon Reference Manual page 29

3. Route the power cable the shortest way possible. The cable is rated for a maximum temperature of 75°C (167°F). When
routing this cable it should be protected from physical damage and from surfaces that might exceed this temperature.
Do not expose the cable to chemicals or oil that may cause the wiring insulation to deteriorate.
Always route the cable so that it does not interfere with safe operation and maintenance of the vehicle. Use proper
electrical and mechanical fastening means for terminating the cable. Properly sized "crimp" type electrical terminals are
an accepted method of termination. Please select electrical connectors sized for use with 22AWG (1mm
4. Provide mechanical support for the cable by securing it to the vehicle structure at approximately one foot intervals,
taking care not to over tighten and pinch conductors or penetrate outer cable jacket.
5. Connect the power cable to the vehicle dock.
6. The Power LED on the front of the vehicle dock illuminates when the dock is connected to vehicle power.
7. The vehicle mounted dock is ready for use.
2
) conductors.
3-9