Marantz NA6005 Owner's Manual page 37

Contents Connections
Switching the display's brightness
Switching the display off reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
1
Press DIMMER.
The brightness of the display switches each time the button is
0
pressed (4 levels).
0 When the display is turned off, the "DISPLAY OFF" indicator lights up on the
display.
0 If you operate the buttons when the display brightness is set to "Off", the display
temporarily lights at 100% brightness level.
Stopping digital outputs
Stopping digital audio output reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
1
Press DIG. OUT.
The digital audio output is switched on and off each time the button
is pressed.
When digital output is turned off, the "DIG. OUT OFF" indicator lights up on the
display.
Front panel Rear panel
Playback
Sleep timer function
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
o To cancel the sleep timer
0 The sleep timer setting is canceled when the unit switches to standby mode.
0 To check the time remaining until the sleep timer is activated, press SLEEP.
37
Remote control
unit
Settings Tips
Press SLEEP during playback and select the setting
time.
The o indicator on the display lights.
0
You can set the sleep timer in the range from 10 to 90 minutes in
0
steps of 10 minutes.
Press SLEEP to set "Sleep 1Off".
The o indicator on the display turns off.
Index
Appendix