Cutting Roll Paper - Epson SC-P800 User Manual

SC-P800 Series User's Guide
c
Important:
If you continue inserting the roll paper after
the screen has changed, the margin at the
leading edge will be more than 50 mm.
I
When the following screen is displayed, press
Load.
When the paper is loaded correctly, the Paper
Setup screen is displayed.
"Displaying the Paper Setup Screen" on
U
page 24

Cutting Roll Paper

Follow the steps below and use scissors and so on to cut
the print results from the roll paper when printing is
complete.
A
Select one of the options on the following screen
displayed when printing is complete.
Cut: Feeds roll paper to the cutting position.
No Cut: Continues printing without cutting.
Basic Operations
B
When you press Cut, follow the instructions on
the control panel's screen.
Removing Roll Paper
A
Press Cut/Eject on the control panel's Home
screen.
B
Press Eject.
The paper will be fed back through the printer.
C
Turn the flange to wind the ejected roll paper.
D
Hold both ends of the spindle and remove it from
the roll paper unit.
34