Epson SC-P800 User Manual page 95

SC-P800 Series User's Guide
System Administration
* indicates the default setting.
Item
Printer Settings Paper Source
Settings
Paper Skew Check
Horizontal
Centered
Print Page Line
Paper Size Check
BK Ink Auto
Change
Using the Control Panel
Parameter
Paper Setup On*
Display
Off
Error Notice On
Off*
On*
Off
On*
Off
On*
Off
On*
Off
On*
Off
95
Content
Automatically displays the media setup
screen when paper is loaded.
When this is Off, AirPrint is unavailable. Also,
Error Notice from Paper Source Settings
becomes Off.
Set whether or not to display an error if the
paper size or type differ from the printer
settings.
This option only takes effect with fine art
media and poster board.
Select On to display an error in the control
panel's screen when the paper is fed in at a
slant.
On is recommended, as feeding the paper at
a slant can cause the paper to jam.
When this is set to On, even if the print
position moves on the loaded paper due to a
cutting error or paper feed error, the printer
detects the width of the paper and the image
is adjusted and printed in the center. Even if
there is a paper cutting error or print position
error, the margins are still set evenly on the
left and right.
When this is set to On, a dotted line is printed
on the roll paper.
Select whether or not (On/Off) to detect the
paper width. When this is set to Off, printing
may be performed beyond the edges of the
paper. If printing is performed beyond the
edges of the paper, the inside of the printer
will be soiled with ink. We recommend
setting this to On.
When this is set to On, the black ink is
changed automatically using the Media
Type selected in the printer driver.
"Changing the Type of Black Ink" on
U
page 41
"Supported Media" on page 118
U