Canon MB2000 series Online Manual page 532

Remove the original on the platen glass or from the document output slot after copying is complete.
Important
• If you load the original on the platen glass, do not open the document cover or remove the original
while Scanning document... is displayed on the LCD.
• If you load the original in the ADF, do not move the original until copying is complete.
Note
• To cancel copying, press the Stop button.
• If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
• When the message informing you that the operation restriction is enabled, ask the administrator of
the machine you are using.
For details on the operation restriction of the machine:
About the Machine Administration
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press the same button (the Color button or the Black button) as
the one which you previously pressed.
Important
• When you load the original on the platen glass, move the document cover gently.
Note
• When Print qlty (print quality) is set High, or you load the original in the ADF, you cannot add the
copying job.
• When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
• If you press the Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you select Cancel all reservations then press the OK button, you can
cancel copying all scanned data. If you select Cancel the last reservation, then press the OK
button, you can cancel the last copying job.
Downloaded from ManualsPrinter.com Manuals 532