Canon MB2000 series Online Manual page 867

#005 No answer.
#012 No paper is in the
recipient's fax machine.
#017 No tone is detected.
#018 Line was busy.
#022 Number is deleted.
#037 Memory is full.
#059 Transmission has been
canceled due to a fax
information mismatch.
#085 Try again in black & white
transmission.
#099 The Stop button was
pressed during
transmission.
#412 The fax could not be sent
from the computer.
#995 The unsent fax was
deleted while automatic
redialing.
Downloaded from ManualsPrinter.com Manuals
You cannot send a document longer than 15.75 inches / 400 mm from the ADF.
"#003" is also printed if it takes time to send a page. Divide the document or set
the image quality (Fax resolution) to a lower setting, then resend it.
The recipient's fax machine does not respond.
Contact the recipient and have the recipient check that the telephone line is
connected correctly.
There is no paper in the recipient's fax machine.
Contact the recipient and have the recipient load paper.
The machine could not detect the dial tone.
Dial tone detect in Advanced FAX settings under FAX settings is set to ON.
Set to OFF.
Advanced FAX settings
The fax/telephone number you dialed is busy.
Try dialing again after waiting for a moment.
The fax/telephone number registered in the machine's directory is incorrect.
Check the recipient's fax/telephone number, correct the fax/telephone number
registered in the machine's directory, then send the document again.
Changing Registered Information
The machine could not send a fax because its memory is full.
Delete contents in memory, then send a fax again.
Document Stored in Machine's Memory
Transmission has been canceled because the machine could not detect the
recipient's fax machine information or the information did not match the dialed
number. This message is displayed when Check RX FAX information in
Security control under FAX settings is set to ON.
For details, see Sending Faxes after Checking Information (Checking the
Recipient's Information).
The recipient's fax machine is not color-compatible.
Resend the document in black & white.
The Stop button was pressed to cancel transmission of the document. Resend it
if necessary.
The fax could not be sent from the computer (Windows only). Ensure that the
machine is connected with the computer correctly and redo operation.
While automatic redialing, the unsent fax is stored in the machine's memory
temporarily until the sending fax is complete. If a power failure occurs or you
unplug the power cord before automatic redialing is complete, all faxes stored in
the machine's memory are deleted and not sent.
Resend the document.
867