Scan Mode Image - Sony LMD-1750W Operating Instructions Manual

Scan mode image

4
4 :3
1024 × 768
4
1024 × 768
–
–
–
645 × 484 (480i, 480P)
768 × 576 (575i, 576P)
The image is scaled horizontally to display in an aspect
ratio of 4:3.
16
3
9
16: 9
1280 × 720
16
3
9
1280 × 720
16
1280 × 768
1280 × 768
1280 × 720
–
MARKER SETTING
USER CONFIG – MARKER SETTING
M A R K E R E N A B L E :
M A R K E R S E L E C T :
C E N T E R M A R K E R :
S A F E T Y A R E A :
M A R K E R L E V E L :
M A R K E R M AT :
Submenu
MARKER ENABLE
MARKER SELECT
9
CENTER MARKER
SAFETY AREA
MARKER LEVEL
MARKER MAT
xxx
xxx
xx
xxx
x
xxx
Setting
Selects ON to display the marker
and OFF not to display.
Note
When NATIVE is selected in the
SCAN setting, the marker is not
displayed.
To display the marker, select a
setting other than NATIVE.
Selects the aspect ratio according to
the film, when the frame of the film
is displayed on the screen.
When 16:9 aspect ratio is selected
with the button which the aspect
function is assigned
You can select from among
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3 and
OFF.
When 4:3 aspect ratio is selected
with the button which the aspect
function is assigned
You can select 16:9 or OFF.
Selects ON to display the center
mark of the picture and OFF not to
display.
Selects the safe area size for the
aspect ratio determined by the
button which the aspect function is
assigned.
You can select from among OFF,
80%, 85%, 88%, 90% and 93%.
When the marker is displayed, the
safe area for the marker is
displayed.
Sets the luminance to display the
MARKER SELECT, CENTER
MARKER and SAFETY AREA.
You can select from among 1 to 3.
When the setting is low, the marker
is displayed dark.
Selects whether you put mat on the
outside of the marker display.
• OFF: No mat is put.
• HALF: Gray mat is put.
• BLACK: Black mat is put.
Adjustment Using the Menus
61