Function Buttons - Sony LMD-1750W Operating Instructions Manual

+/– buttons
Press to select the items and setting values.
ENTER button
Press to confirm a selected item on the menu.
When the menu is not displayed and the button is
pressed, the distinguished signal format is displayed.
RETURN button
When the menu is displayed and the button is pressed,
the value of an item is reset to the previous value.
When the menu is not displayed and the button is
pressed, the function selected in FUNCTION
BUTTON SETTING of the USER CONFIG menu is
displayed on the side of the F1 to F4 button. Also,
when the fan stops, this button blinks.
k Input select buttons
Press the button to monitor the signal input to each
connector.
A-1, A-2, B-1 and B-2 buttons are used when an
optional input adaptor has been installed in the option
slot.
COMPOSITE button: to monitor the signal through
the COMPOSITE IN connector
Y/C button: to monitor the signal through the Y/C IN
connector
RGB button: to monitor the RGB signal through the
connectors for the R/G/B signal input
COMPONENT button: to monitor the component
signal through the connectors for Y/P
A-1 button: to monitor the signal from connector 1
(the connectors for the R/G/B signal input in BKM-
229X) of the input adaptor installed to the option slot
A
A-2 button: to monitor the signal from connector 2
(the connectors for Y/P
229X) of the input adaptor installed to the option slot
A
B-1 button: to monitor the signal from connector 1
(the connectors for the R/G/B signal input in BKM-
229X) of the input adaptor installed to the option slot
B
B-2 button: to monitor the signal from connector 2
(the connectors for Y/P
229X) of the input adaptor installed to the option slot
B
HD15 button: to monitor the signal through the HD15
input connector
DVI button: to monitor the signal through the DVI-D
input connector
l Function buttons
You can turn the assigned function on or off.
The factory setting is as follows;
F1 button: EXT SYNC
F2 button: SCAN
F3 button: ASPECT
F4 button: H/V DELAY
46
Location and Function of Parts and Controls
/P signal input
B R
/P signal input in BKM-
B R
/P signal input in BKM-
B R
You can assign the function from among SCAN,
ASPECT, EXT SYNC, BLUE ONLY, MONO,
MARKER, H/V DELAY, MULTI DISPLAY,
CLOSED CAPTION and APA in FUNCTION
BUTTON SETTING of the USER CONFIG menu (see
page 63).
For details of the function assigned to the function
button, see page 63.
m Speakers
The audio signal which is selected by the input select
button is output.
When BKM-220D or BKM-243HS is not installed, the
audio signal which is selected in INPUT SELECT of the
USER CONFIG menu is output (see page 65).
When BKM-220D or BKM-243HS is installed, the
audio signal of the channel which is selected in OPTION
AUDIO SETTING of the USER CONFIG menu is
output (see page 65).
The audio signals from the speakers are output from the
AUDIO L/R OUT connector on the rear (see page 49).