Installing The Input Adaptor; Selecting The Default Settings - Sony LMD-1750W Operating Instructions Manual

Installing the Input
Adaptor
Before installing the input adaptor, disconnect the
power cord.
1
Remove the panel of the optional input slot.
2
Insert the input adaptor into the slot.
PA RA LL
EL RE MO
TE
SE RI AL
RE MO TE
3
Tighten the screws.
52
Installing the Input Adaptor / Selecting the Default Settings
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
5
4
3
3
COLOR
TEMP
1 NORTH AMERICA D65
2 LATIN ARGENTINA D65
AMERICA
PARAGUAY D65
PAL&PAL-N
URUGUAY D65
AREA
NTSC&PAL OTHER
D65
-M AREA AREA
3 AFRICA AUSTRALASIA
D65
EUROPE MIDDLE-EAST
NTSC AREA D65
4 ASIA EXCEPT
JAPAN
PAL AREA D65
5 JAPAN D93
3
1
2
COMPONENT NTSC COLOR
LEVEL SETUP SPACE
BETA7.5 7.5 SMPTE-C
SMPTE 0 EBU
SMPTE 0 EBU
SMPTE 0 EBU
BETA7.5 7.5 SMPTE-C
SMPTE 0 EBU
BETA7.5 7.5 SMPTE-C
SMPTE 0 EBU
SMPTE 0 EBU