Sony LMD-1750W Operating Instructions Manual page 59

For the DVI/HD15 input
* The 1/3 menu cannot be adjusted.
USER CONTROL 2/3
S U B C O N T R O L
C O N T R A S T :
B R I G H T N E S S :
C H R O M A :
P H A S E :
A P E R T U R E :
B A C K L I G H T :
USER CONTROL 3/3
PICTURE CONTROL
S I Z E H :
S I Z E V :
S H I F T H :
S H I F T V :
D O T P H A S E :
P I T C H :
R E S O L U T I O N :
R E S E T
Submenu Setting
SUB CONTROL Adjusts finely the adjustment range
of the button on the front panel for
CONTRAST, BRIGHTNESS,
CHROMA and PHASE.
• CONTRAST: Adjusts the
• BRIGHTNESS: Adjusts the
• CHROMA: Adjusts color
• PHASE: Adjusts color tones.
• APERTURE: Adjusts the picture
• BACKLIGHT: Adjusts the
x
x
x
x
x
x
xx
xx
xx
xx
xx
xx
xxx
picture contrast.
picture brightness.
intensity. The higher the
setting, the greater the
intensity. The lower the
setting, the lower the
intensity.
The higher the setting, the
more greenish the picture.
The lower the setting, the
more purplish the picture.
sharpness.
The higher the setting, the
sharper the picture. The
lower the setting, the softer
the picture.
backlight. When the setting
is changed, the brightness of
the backlight is changed.
Submenu Setting
PICTURE CONTROL Adjusts to monitor the picture more
clearly.
• SIZE H: Adjusts the horizontal
• SIZE V: Adjusts the vertical size
• SHIFT H: Adjusts the position of
• SHIFT V: Adjusts the position of
• DOT PHASE: Adjusts the dot
• PITCH: Adjusts the horizontal
• RESOLUTION: Sets when the
• RESET: Resets the value of
size of the picture. The
higher the setting, the larger
the horizontal size of the
picture. The lower the
setting, the smaller the
horizontal size of the
picture.
of the picture. The higher
the setting, the larger the
vertical size of the picture.
The lower the setting, the
smaller the vertical size of
the picture.
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
the picture. As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
phase. Adjust the picture
further for a finer picture
after APA (page 63) is
adjusted.
size of the picture with the
left side of the picture fixed.
The higher the setting, the
larger the width of the
picture. The lower the
setting, the narrower the
width of the picture.
computer signal is input and
it is difficult to understand
the signal type such as
XGA/60 or WXGA/60.
• XGA: Displayed as XGA
signal.
• WXGA: Displayed as
WXGA signal.
SIZE H, SIZE V, SHIFT H,
SHIFT V, DOT PHASE and
PITCH to the factory preset
value.
59
Adjustment Using the Menus