Sony LMD-1750W Operating Instructions Manual page 68

Remote input connector
Parallel remote
Modular connector 8-pin (1)
Serial remote
D-sub 9-pin (RS-232C) (1)
RJ-45 modular connector
(ETHERNET) (1)
Optional input slot
2 slots
Signal format:
H: 15 to 45 kHz
V: 48 to 60 Hz
DC IN connector DC12V (output impedance 0.05 Ω
or less)
Output
Composite output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
Y/C output connector
4-pin mini-DIN (1)
Loop-through, with 75 ohms automatic
terminal function
RGB/component connectors
BNC type (3)
Loop-through, with 75 ohms automatic
terminal function
External synchronized output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
Audio monitor output connectors
RCA phono jack (2)
Built-in speaker output
1.0 W+1.0 W (stereo)
General
Power AC 100 to 240 V, 50/60 Hz, 0.7 A - 0.3
A
DC 12V, 5.7 A
Power consumption
Maximum: approx. 70 W (when two
BKM-229X are installed)
Peak inrush current
(1) Power ON, current probe method:
13.2 A (100 V), 24.8 A (240V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
17.68 A (230 V)
Dimensions Approx. 439.5 × 284.0 × 105.0 mm
(including the projection parts)
(17
(w/h/d)
Mass Approx. 6.0 kg (13 lb 4 oz) (when no
input adaptor is installed)
68
Specifications
3 1 1
/ × 11 / × 4 / inches)
8 4 4
Approx. 6.4 kg (14 lb 2 oz) (when two
BKM-229X are installed)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30 % to 85 % (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0 % to 90 %
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Operating Instructions (1)
CD-ROM (1)
Warranty Card (1)
Using the CD-ROM Manual (1)
Optional accessories
SDI 4:2:2 input adaptor
BKM-220D
HD/D1-SDI input adaptor
BKM-243HS
NTSC/PAL input adaptor
BKM-227W
Analog component input adaptor
BKM-229X
HD/SD-SDI closed caption adaptor
BKM-244CC
Mounting bracket
MB-530
Monitor stand
SU-561
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE LOSS
OF PRESENT OR PROSPECTIVE PROFITS DUE
TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.