Canon Vixia HF10 Instruction Manual page 70

Photos
FUNC.
[ MENU]
[ SYSTEM SETUP]
[IMG QUALITY]
Desired image quality*
FUNC.
* The number displayed at the bottom
indicates the approximate number of
images that can be recorded with the
current quality setting.
T
O CAPTURE THE STILL IMAGE
1 Play back the scene containing
the picture you want to capture.
2 Pause the playback at the point
you want to capture.
PHOTO
3 Press
NOTES
• The data code of the still image will
reflect the date and time of recording of
the original scene.
• A still image captured from a scene with
lots of fast movement may be blurred.
• The still image will be recorded
to the memory selected for recording
still images (
Protecting Photos
You can protect still images from
accidental erasure.
FUNC.
( 28)
Downloaded From VideoCamera-Manual.com Manuals
70
fully.
33).
(
1
Open the image selection screen.
FUNC.
[ PROTECT] appears on the
screen.
2
Select (
want to protect.
3
Press
image.
appears on the bottom bar and
the image cannot be erased. Press
again to cancel the image
protection.
4
Repeat steps 2-3 to protect
additional images or press
twice to close the menu.
IMPORTANT
Initializing the memory (
permanently erase all recordings,
including protected still images.
Copying Photos
You can copy still images from the built-
in memory to the memory card and vice
versa.
POINTS TO CHECK
Select in advance the memory from which
you want to copy the still images (
26)
[ PROTECT]
) the still image you
to protect the still
33) will
FUNC.
( 26)
64
).