Canon Vixia HF10 Instruction Manual page 23

Accessories
Fasten the grip belt.
• Adjust the grip belt so that you can
reach the zoom lever with your
index finger, and the
button with your thumb.
• You can remove the grip belt and
replace it with the supplied wrist
strap.
T
O REMOVE THE GRIP BELT
1 Lift the padded handgrip's flap
and detach the strap from the
Velcro pad.
Downloaded From VideoCamera-Manual.com Manuals
2 Pull the strap to remove it first
START/STOP
Pass the attaching end of the wrist
strap through the back bracket on
the camcorder, thread the wrist strap
through the loop and fasten.
You can also attach the wrist strap to
the strap mount on the grip belt to use
both for extra convenience and
protection.
from the front bracket on the
camcorder, then to unthread it
from the handgrip and finally to
remove it from the rear bracket on
the camcorder.
T
O ATTACH A WRIST STRAP
23