First Time Settings - Canon Vixia HF10 Instruction Manual

6 FUNC.
Press
You can press
menu at any time.
Abbreviation of Menu Selections in this
Manual
In this manual, the
abbreviate menu selections. Below is
an example of changing a setting using
the setup menus.
FUNC.
[ MENU]
[ DISPLAY SETUP]
[LANGUAGE
Desired language
FUNC.
For selections in the FUNC. menu, the
abbreviated form will always show the
initial default value. In recording mode,
its icon will appear on the left side
column when you first open the menu.
If the setting was changed, the icon of
the currently selected option will appear
instead.
FUNC.
[ IMAGE EFFECT OFF]
Desired image effect
FUNC.
Downloaded From VideoCamera-Manual.com Manuals
.
FUNC.
to close the
arrow is used to
]

First Time Settings

Setting the Date and Time
You will need to set the date and time of
the camcorder before you can start
using it. The [DATE/TIME] screen will
appear automatically when the
camcorder's clock is not set.
When the [DATE/TIME] screen
appears, the year will be displayed in
orange and indicated with up/down
arrows.
1
Change ( ) the year and move
( ) to the month.
2
Change the rest of the fields
(month, day, hour and minutes) in
the same way.
3
Select ( ) [OK] and press
start the clock and close the setup
screen.
IMPORTANT
• When you do not use the camcorder for
about 3 months, the built-in
rechargeable lithium battery may
discharge completely and the date and
time setting may be lost. In such case,
recharge the built-in lithium battery
( 113) and set the time zone, date
and time again.
to
29