Canon Vixia HF10 Instruction Manual page 64

Photos
1 If the joystick guide does not
appear on screen, press
display it.
2 Push the joystick (
3 Select ( ) [
IMAGES] or [
IMAGES].
4 Jump ( ) the number of images
selected and press
You can press
joystick guide.
IMPORTANT
• Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
mode dial.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
You can play a slideshow of all the still
images.
1
Select ( ) the first still image of
the slideshow.
2
Press / to play back the still
images one after another.
Downloaded From VideoCamera-Manual.com Manuals
64
to
) toward .
JUMP 10
JUMP 100
.
again to hide the
Press to stop the slideshow.
Index Screen
Move the zoom lever toward W.
1
The still images index screen appears.
2
Select ( ,
• Move the orange selection frame
to the image you want to view.
• Repeatedly press
extend the selection frame and
browse through whole index
pages.
3
Press .
The index screen closes and the
selected image is displayed.
T
O SELECT WHICH STILL IMAGES TO
PLAY BACK
You can switch between the still images
recorded in the built-in memory and
those recorded on the memory card.
1 In the index screen, move (
orange selection frame to the tabs
on the top of the screen.
2 Select ( ) the location of the still
images you want to play back.
3 Return ( ) to the index screen to
select the still image.
Still images in the built-in memory
Still images on the memory card
) an image.
or to
) the