Zooming - Canon Vixia HF10 Instruction Manual

Zooming

mode: In addition to the optical
zoom, digital zoom is also available
( 92).
W T
W Zoom out
12x Optical Zoom
Move the zoom lever toward W to
zoom out (wide angle). Move it
toward T to zoom in (telephoto).
Press gently for a slow zoom; press
harder for faster zooms. You can also
set [ZOOM SPEED] (
three constant speeds (3 is the fastest,
1 the slowest).
Downloaded From VideoCamera-Manual.com Manuals
( 26)
W T
T Zoom in
92) to one of
NOTES
• Keep at least 1 m (3.3 ft.) away from the
subject. At full wide angle, you can
focus on a subject as close as 1 cm
(0.39 in.).
• When [ZOOM SPEED] is set to
[ VARIABLE]:
- When you use the T and W buttons on
the wireless controller or LCD panel,
the zoom speed will be constant at
[ SPEED 3].
- The zoom speed will be faster in
record pause mode than when actually
recording.
Quick Start Function
When you close the LCD panel with the
camcorder on, the camcorder enters
the standby mode. In standby mode the
camcorder consumes only about half
the power used when recording, saving
energy when you are using a battery
pack. Additionally, when you open the
LCD panel, the camcorder is ready to
start recording in approximately
1 second, ensuring you do not miss
important shooting opportunities.
1
With the camcorder on and in a
recording mode, close the LCD
panel.
A beep will sound and the
indicator will change to orange to
indicate the camcorder entered the
standby mode.
( 26)
37