Canon Vixia HF10 Instruction Manual page 61

Basic Recording
Taking Photos
1
Set the mode dial to
2
Turn on the camcorder.
You can select the memory to
be used for recording still images
( 33).
3 PHOTO
Press
• Once the focus is automatically
adjusted,
one or more AF frames will appear.
• When you press
wireless controller, the still image is
Downloaded From VideoCamera-Manual.com Manuals
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
.
halfway.
will turn green and
PHOTO on the
recorded after the autofocus is
activated and locked.
4
Press
The ACCESS indicator will flash as
the still image is being recorded.
IMPORTANT
Observe the following precautions while
( 26)
ACCESS
the
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the mode
dial.
NOTES
• If the subject is not suitable for
autofocus,
focus manually (
• When the subject is too bright,
"OVEREXP." starts flashing. In such
case, use the optional FS-H37U ND
filter.
Selecting Photo Size and Quality
Still images are recorded as JPG files.
As a general rule, select a larger image
size for higher quality. Select the
[LW 1920x1080] size for photos with an
aspect ratio of 16:9.
PHOTO
fully.
indicator is on or flashing.
turns yellow. Adjust the
50).
61