Special Playback Modes - Canon Vixia HF10 Instruction Manual

Video
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
mode dial.
• You may not be able to play back with
another AVCHD device the movies you
recorded on the memory card with this
camcorder. In such case, play back the
movies on the memory card using this
camcorder.

Special playback modes

To enter the special playback modes, you can use the buttons on the LCD panel or
wireless controller (
Special playback mode
Fast playback
Slow playback
Frame-by-frame playback
Skipping Scenes:
To the beginning of the next scene
To the beginning of the current scene
To the previous scene
End special playback
During some special playback modes, you may notice some anomalies (blocky video
artifacts, banding, etc.) in the playback picture.
* The speed indicated on the screen is approximate.
Downloaded From VideoCamera-Manual.com Manuals
40
16). There is no sound during the special playback modes.
Initial mode
Normal playback
Playback pause
Playback pause
Normal playback
Any special
playback mode
• You may not be able to play back with
this camcorder movies recorded using
another AVCHD device.
NOTES
• Depending on the recording conditions,
you may notice brief stops in video or
sound playback between scenes.
PLAYLIST
• You can press
controller to switch between the original
movies index screen and the playlist of
the respective memory.
Special Playback Modes
Operation on the camcorder (
or on the wireless controller (
, : Press
Press again to increase the playback speed
5x 15x 60x the normal speed*
, : Press
Press again to increase the playback speed
1/8 1/4 the normal speed
: Press
advance one frame or hold pressed for
continuous frame-by-frame playback
: Push the joystick (
: Press
: Push the joystick (
: Press
: Push the joystick (
: Press twice
: Press /
: Press
on the wireless
)
)
or
or
or to reverse/
)
)
) twice